Thermal Analysis Quality Analyzer for melting iron
1 Brief Introduction
CE meter is widely used to measure carbon equivalent, carbon content, silicon content, pouring temperature TM, liquidus temperature TL, solidus temperature TS of molten iron. The results can be printed directly.
2 Characteristics
- The measurement results are directly read by digital display. The measuring time is 2-3 minutes, which is convenient for foundry engineers to make subsequent operation.
- The machine is easy to operate and maintenance-free.
- The machine can be moved freely on the furnace table, and multiple furnaces can use one machine at the same time.
- The machine can automatically control important metallurgical parameters.
| Measurement parameters | Measurement of C, Si, CEL, △T, △TM, calculation of Rm, HB, R/H, MEG, K |
| Measuring range | C 2.8-4.2%; Si 0.9-3.0%; CEL 2.5-5.0% |
| Accuracy | CEL±0.047% C±0.039% Si±0.1% |
| Display | 4-digit LED display;digit height 50mm; resolution: 1℃ |
| Operational mode | 9 keys to select the required parameters, in which the "Auto" key cyclically displays C, Si, CEL; Adjust Silicon content and carbon content by rotary knob |
| Power supply | AC:220V±10% 50HZ |
| Ambient temperature | 0℃-50℃ |
| Printing parameters | HB,RM,PEAK,TL,CEL,SC,TS,C%,Si% |
| Dimension | 330mm×260mm×280mm |
Application
This thermal analyzer is mainly used in the foundry industry for rapid detection
and analysis of hot metal components.
The thermal analyzer can be operated by connecting the power supply, sample cup and the support holder. Pour the molten iron to be measured into the sample cup and the thermal analyzer can automatically measure the carbon content C%, silicon content Si%, carbon equivalent CEL of the molten iron within 2 to 3 minutes.
Thermal analyzer has the characteristics of fast, simple and accurate, and should play a greater role in controlling the quality of casting production.
Characteristics
The thermal analyzer works using scientific evaluation methods and can automatically determine the main metallurgical parameters of gray and white cast iron.
The thermal analyzer is easy to operate and measurement data can be easilyread from the LED display even in dim light.
Thermal analyzer has the following characteristics:
1. Wide measuring range, suitable for molten iron before and after incubation
and spheroidized molten iron.
2. Strong anti-interference ability.
3. By using a suitable sample cup, the degree of super-cooling during the
condensation process of molten iron can be detected.
4. It has operation error indication function.
5. It has a serial interface and can be equipped with a printer.
Technical Parameters
1. Measuring range
Measuring range: 200℃～1370℃
Graduation number: K
Carbon content C%: 2.1～4.2
Silicon content Si%: 0.6～3.8
Carbon equivalent CEL: 2.5～5
2. Measurement accuracy
C: ±0.05%
Si: ±0.1%
CEL:±0.1%
3. Instrument display
The instrument display uses 4-digit LED display with a character height of
50mm; resolution: 1℃
4. Power supply: AC220V±10%; 50Hz
5. Environmental conditions
a. Working conditions: Temperature (℃): 0～50; Humidity (%RH): 5～80
b. Storage conditions: Temperature (℃): -20~60; Humidity (%RH): 5~90
6. Overall dimensions (length × width × height): 330mm×260mm×280mm
|
|
WLX-DRTG Quality Analyzer to measure C/Si/CEL for molten iron thermal analysis in Foundry Industry Images
|
